24 Slot Cooler Motor Winding Data & Diagram | 1440 RPM

24 Slot Cooler Motor Winding Data ⚡ Cooler Motor Winding Diagram | 1440 RPM

Are you looking for 24 Slot Cooler Motor Winding Data with a complete running and starting winding specification? In this article, we are sharing the winding details of a high-speed 1440 RPM cooler motor, including coil pitch, coil turns, winding layers, copper wire numbers, and stator measurements.

This Cooler Motor Winding Diagram and Data is useful for electricians, motor mechanics, cooler repair technicians, and professional motor rewinding workers.

If you want to rewind a 24-slot cooler motor or learn about its running and starting winding connections, this information will help you understand the required winding specifications.

Before starting the rewinding process, check the following stator measurements and motor specifications.

Motor DetailsSpecifications
Motor TypeCooler Motor
Motor Speed1440 RPM
Total Slots24 Slots
Core Length1 Inch
Inner Diameter3 Inches
Outer Diameter5 Inches
Winding TypeRunning & Starting Winding
Wire MaterialCopper Wire

The running winding is an important part of a single-phase cooler motor. Below are the running coil specifications for this 24-slot cooler motor.

Running Winding DetailsSpecifications
Coil Pitch1-4 & 1-6
Coil Turns150 & 300
Coil Layer1 & 2
Wire Number29 Number
Wire TypeCopper Wire

Running Winding Highlights:

  • Running winding uses 29 Number copper wire.
  • Two coil pitches are used: 1-4 and 1-6.
  • Coil turns are 150 and 300.
  • Winding layers are 1 and 2.

The starting winding helps the single-phase motor develop the initial torque required to start rotating. Below are the starting winding specifications.

Starting Winding DetailsSpecifications
Coil Pitch1-4 & 1-6
Coil Turns160 & 320
Coil Layer1 & 2
Wire Number33 Number
Wire TypeCopper Wire

Starting Winding Highlights:

  • Starting winding uses 33 Number copper wire.
  • Coil pitch: 1-4 and 1-6.
  • Coil turns: 160 and 320.
  • Winding layers: 1 and 2.
  • Copper wire is used for the starting winding.

3. Difference Between Running and Starting Winding

Here is a quick comparison of both winding specifications:

DetailsRunning WindingStarting Winding
Coil Pitch1-4 & 1-61-4 & 1-6
Coil Turns150 & 300160 & 320
Coil Layer1 & 21 & 2
Wire Number29 Number33 Number
Wire TypeCopper WireCopper Wire

4. 24 Slot Cooler Motor Winding Diagram

The 24-slot cooler motor winding diagram shown in this post is a useful visual reference for motor rewinding professionals.

It shows the 24-slot cooler motor stator and winding arrangement. The provided specifications cover both running and starting windings, including coil pitch, turns, layers, and wire numbers.

Before starting the rewinding process, carefully identify the running and starting winding positions and verify the original winding connections.

5. Important Tips for Cooler Motor Rewinding

  1. Always check the stator slot count before starting rewinding.
  2. Measure the core length, inner diameter, and outer diameter.
  3. Use the specified copper wire sizes for running and starting windings.
  4. Follow the correct coil pitch and coil turns.
  5. Check the insulation condition before inserting new coils.
  6. Verify winding connections and insulation before testing the motor.
  7. Check the capacitor rating and motor connections according to the original motor specifications.

Note: The winding details published here are based on the specifications provided for this particular 24-slot cooler motor. Always verify the winding layout and electrical connections against the original motor before rewinding.

Q1. How many slots are there in this cooler motor?

This cooler motor has a total of 24 slots.

Q2. What is the RPM of this cooler motor?

The motor speed shown in this winding reference is 1440 RPM.

Q3. Which wire is used in the running winding?

29 Number copper wire is specified for the running winding.

Q4. Which wire is used in the starting winding?

33 Number copper wire is specified for the starting winding.

Q5. What is the running winding coil turn?

The running winding has 150 and 300 coil turns.

Q6. What is the starting winding coil turn?

The starting winding has 160 and 320 coil turns.

Q7. What is the core length of this cooler motor?

The stator core length is 1 inch.

Q8. What is the coil pitch of this 24-slot cooler motor?

Both running and starting windings have coil pitches of 1-4 and 1-6.

Conclusion

This 24 Slot Cooler Motor Winding Data provides the important specifications required to understand the running and starting winding of a 1440 RPM cooler motor.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top